Skip menu

How do I change the input on my television?

How do I change the input on my television?

This is how you change the input if you have a Cogeco remote control:

* If you are using your television’s remote control your will find the steps to follow below:

The input selection will vary based on your television, please refer to your television manufacturer for more information.

TV Remote Control TV Input List Screen Shot
  1. Ensure your television is programmed into the Cogeco remote.
    • For more information on how to program your remote to your devices click here.
  2. Find out what input you need to change to.
    • If you are using a cable box with a coaxial connection you will need to ensure your television is set to cable or TV then set the channel to channel 3.
  3. Click on the TV button near the top of the remote.
  4. Click on the video source button on the bottom left corner of the remote.
  5. You should see an input list (shown above right).
  6. Using the arrow keys to highlight/select the input you want.
    • Some televisions may require pressing the source button multiple times to change the inputs.
  7. Press the “ok/select” button on the desired input.
  8. You should now see a picture, press the CBL button to control the cable box again.

*If you have multiple devices connected to your television, you may want to print this FAQ and take note of what input controls what device.

TV/Cable:   HDMI 1:  
AV/Video:   HDMI 2:  
Component:   HDMI 3:  

This is how you change the input if you using your television’s remote control:

The input selection will vary based on your television, please refer to your television manufacturer for more information.

TV Remote Control TV Input List Screen Shot
  1. Locate the input button on your remote: Input, A/V, Source, Video, etc...
    • For more information regarding your TV remote please refer to your TV manufacturer.
  2. Find out what input you need to change to.
    • If you are using a cable box with a coaxial connection you will need to ensure your television is set to cable or TV then set the channel to channel 3.
  3. Click on the input button found on your remote.
  4. Using the arrow keys to highlight/select the input you want.
    • Some televisions may require pressing the source button multiple times to change the inputs.
  5. Press the “ok/select” button on the desired input.
  6. You should now see a picture, On the Cogeco press the CBL button and change your channels.

*If you have multiple devices connected to your television, you may want to print this FAQ and take note of what input controls what device.

TV/Cable:   HDMI 1:  
AV/Video:   HDMI 2:  
Component:   HDMI 3:  

Was this information helpful?

Yes Somewhat No

Tell us how we can improve this information:

Highest Customer Satisfaction Award For Cogeco call centers

Learn More
Back to top
Check availability in your area

To verify which of our services are available in your area, please enter your house's civic number and postal code.