What do I do if the picture and sound don’t go together?

This is usually caused with a HDMI connection from the receiver to the TV. Please follow the steps below to resolve the situation.

  • Check if the problem is present on one or many channels. If the problem is present on one channel only, please refer to the Reported Outages page to check if there is an outage on this channel.
  • If there is many channels affected, turn off the receiver by pressing on CBL and PWR>/b>, then wait 15 seconds. Turn the receiver back on. The sound should now go together.
  • Otherwise, unplug the HDMI cable behind the receiver or the TV, and then wait 15 seconds. Plug the HDMI cable back in. The sound should now go together.

If the problem persists, contact the Technical Support for more assistance.

Was this helpful?

Was this helpful?
Heads Up!

You are being redirected to a part of our website that is not adapted to your device.

Continue anyhow

Stay on this site