Yealink SIP-T33G Gigabit Colour IP Phone Quick Start Guide

Yealink SIP-T33G Phone

Welcome to Cogeco's business phone service. This handy guide will take you through all of the Yealink SIP-T33G Gigabit Colour IP Phone features, including setting up your voicemail, conference calls and customizable settings. We've also included useful, time-saving tips throughout this guide.

Getting Started with Hosted PBX

Setting Up Voicemail Greetings From Your Phone

  1. Dial feature code *98 or tap the Message button
  2. Enter a PIN of your choice (at least 6 digits)
  3. Re-enter PIN to confirm
  4. Upon hearing the system voice prompt, record your name
  5. Press # to confirm
  6. Setting up the Greetings
    Choose one of the following options:
    • Press 1 to record a personal greeting. Follow the voice prompts to complete the recording.
    • Press 2 to select system generated greetings that include your name. Greetings are automatically created.
    • Press 3 to select system generated greetings that include your phone number. Greetings are automatically created.
    • Press 4 to select system generated greetings that include both your name and telephone number. Greetings are automatically created.

Press the pound key (#) to confirm.

After 3 unsuccessful attempts to log in, you will be locked out. Please contact technical support at 1-855-440-5602.

Accessing the Voice Portal from a remote location is not offered.

VoIP 9-1-1 Service features may differ from traditional wireline 9-1-1 services.

Basic Call Features

Placing a Call

Using the handset:

  1. Pick up the handset.
  2. Enter the number, and then press the Send soft key.

Using the speakerphone:

  1. With the handset on-hook, press the speaker button.
  2. Enter the number, and then press the Send soft key.

Using the headset:

  1. With the headset connected, press the headset button to activate the headset mode.
  2. Enter the number, and then press the Send soft key.

Tip:

During a call, you can alternate between the headset, hands-free speaker phone and handset modes by pressing the Headset key, the Speakerphone key or by picking up the handset. Headset mode requires a connected headset.

Answering a Call

  • Using the handset: Pick up the handset.
  • Using the speakerphone: Press the speaker button.
  • Using the headset: Press the headset button.

Tip:

You can reject an incoming call by pressing the Reject soft key.

Ending a Call

  • Using the handset: Hang up the handset or press the End Call soft key.
  • Using the speakerphone: Press the speaker button or the End Call soft key.
  • Using the headset: Press the End Call soft key.

Redial

  • Press the redial button to enter the Placed Call list, press the up button or the down button to select the desired entry, and then press the Send soft key.
  • Press the redial button twice when the phone is idle to dial out the last dialed number.

Call Mute and Un-Mute

  • Press the microphone button to mute the microphone during a call.
  • Press the microphone button again to un-mute the call.

Call Hold and Resume

To place a call on hold:

Press the call hold button or the Hold soft key during an active call.

To resume the call, do one of the following:

If there is only one call on hold, press the call hold button or the Resume soft key.

If there is more than one call on hold, press the up button or the down button to select the desired call, and then press the call hold button or the Resume soft key.

Call Transfer

You can transfer a call in the following ways:

Blind Transfer

  1. Press the call transfer button or the Transfer soft key during an active call. The call is placed on hold.
  2. Enter the number you want to transfer to.
  3. Press the call transfer button or the Transfer soft key.

Semi-Attended Transfer

  1. Press the call transfer button or the Transfer soft key during an active call. The call is placed on hold.
  2. Enter the number you want to transfer to, and then press Send.
  3. Press the call transfer button or the Transfer soft key when you hear the ringback tone.

Attended Transfer

  1. Press the call transfer button or the Transfer soft key during an active call. The call is placed on hold.
  2. Enter the number you want to transfer to, and then press Send.
  3. Press the call transfer button or the Transfer soft key when the second party answers.

Call Forward

  • To enable call forwarding, dial feature code *72 followed by the number you want to forward your number to.
  • To disable call forwarding, dial feature code *73.

Call Conference

  1. Press the Conference soft key during an active call.
  2. The call is placed on hold.
  3. Enter the number of the second party, and then press the Send soft key.
  4. Press the Conference soft key again when the second party answers.
  5. All parties are now joined in the conference.
  6. Press the End Call soft key to disconnect all parties.

Tip:

You can split the conference call into two individual calls by pressing the Split soft key.

Speed Dial

To configure a speed dial key:

  1. Press the Menu soft key when the phone is idle, and then select: Features > DSS Keys.
  2. Select the desired DSS key, and then press the Enter soft key.
  3. Select Speed Dial from the Type field, select the desired line from the Account ID field, enter a label in the Label field and enter the number in the Value field.
  4. Press the Save soft key to accept the change.

To use the speed dial key:

Press the Speed Dial key to dial out the preset number.

Voice Message

The message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the message center. The power indicator LED slowly flashes red.

To listen to voice messages:

  1. Press the Message button or the Connect soft key.
  2. Follow the voice prompts to listen to your voice messages.

Customizing Your Phone

Call History

Press the History soft key when the phone is idle, press the up button or the down button to scroll through the list.

Select an entry from the list. You can do the following:

  1. Press the Send soft key to call the entry.
  2. Press the Delete soft key to delete the entry from the list.

If you press the Option soft key, you can also do the following:

  • Select Detail to view detailed information about the entry.
  • Select Add to Contacts to add the entry to the local directory.
  • Select Add to Blacklist to add the entry to the blacklist.
  • Select Delete All to delete all entries from the list.

Contact Directory

To add a contact:

  1. Press the Directory soft key when the phone is idle, and then select All Contacts.
  2. Press the Add soft key to add a contact.
  3. Enter a unique contact name in the Name field and contact numbers in the corresponding fields.
  4. Press the Save soft key to accept the change.

To edit a contact:

  1. Press the Directory soft key when the phone is idle, and then select All Contacts.
  2. Press the up button or the down button to select the desired contact, press the Option soft key and then select Detail from the prompt list.
  3. Edit the contact information.
  4. Press the Save soft key to accept the change.

To delete a contact:

  1. Press the Directory soft key when the phone is idle, and then select All Contacts.
  2. Press the up button or the down button to select the desired contact, press the Option soft key and then select Delete from the prompt list.
  3. Press the OK soft key when the LCD screen prompts “Delete selected item?”.

Tip:

You can add contacts from call history easily. For more information, refer to Call History above.

Volume Adjustment

  • Press the volume dial button during a call to adjust the receiver volume of the handset/speakerphone/headset.
  • Press the volume dial button when the phone is idle to adjust the ringer volume.

Ringtones

  1. Press the Menu soft key when the phone is idle, and then select Basic > Sound > Ringtones.
  2. Press the up button or the down button to select Common or the desired account and then press the Enter soft key.
  3. Press the up button or the down button to select the desired ringtone.
  4. Press the Save soft key to accept the change.

Auto Attendant Greeting

  1. Dial the Auto Attendant (AA) phone number (E.g. 51#, 52#, 53# provided by Cogeco)
  2. Upon hearing the IVR Prompt, press/key-in *6
  3. Enter PIN followed by # (E.g. 1234#)
  4. If entering the system for the first time, it will give you the option of choosing your PIN (a minimum of 4 digits is recommended). Re-enter the new PIN to confirm, followed by #.

To record and edit recordings for business and non-business hours:

  • Press 1 to change the configuration of your automated attendant
  • Press 1 to turn on/off your automated attendant
  • Press 2 to record or edit announcements used for your business hours menu
  • Press # to record your initial greeting

When finished recording, press #

  • Press 1 to save the recording
  • Press 2 to re-record/override
  • Press 3 to exit
  • Press 4 to continue recording
  • Press 3 to record or edit announcements used for your non-business hours menu
    (Note: this option will be only available if you have your attendant configured by Cogeco to provide your callers with options during non-business hours)

Follow the voice prompts to complete the recording.

Press the (*) button to return to the previous menu.

Was this helpful?
Was this helpful?

Three ways to find the best solutions for your business